Brand / Client-Standards Agent — ai brand standards enforcement for Revit
The Brand / Client-Standards Agent reads a Revit model and checks title blocks, view templates, finish schedules, and family naming against a documented brand or client-standard pack. It supports both studio-internal standards and external client-mandated packs on the same rule library. It is available as a bespoke Labs engagement under MSA + Appendix for Revit-based studios that need repeatable brand enforcement.
- Per-sheet brand-conformance report on every issued drawing, against the active standard pack and Revit model version.
- Element-pinned findings on title blocks, view templates, finish keynotes, signage families, and standard details, ready for Revit worksharing review.
- Single agent configured once per brand or client pack, then run on every Revit project tagged to that standard across the studio.
What the Brand / Client-Standards Agent does.
-
Title-block and sheet-template enforcement
Reads every issued sheet in the Revit model against the standard pack’s title-block, sheet-numbering, and revision-cloud conventions. Flags non-conforming sheets with the specific offending field — wrong project number, missing client logo, or incorrect revision schema. Reports are grouped by sheet set so a standards lead can clear an entire package in a single pass and align with existing Revit standards enforcement workflows.
-
View-template and visibility-graphics audit
Walks every plan, section, elevation, and 3D view, compares against the standard pack’s view templates, and flags overrides, missing scope boxes, and non-standard visibility/graphics settings. Highlights drift since the last issuance so standards don’t quietly erode between milestones. Can run alongside the Studio QA/QC Agent so generic model health and brand-specific presentation rules are enforced in the same Revit review cycle.
-
Finish-keynote and material-specification check
Reads finish schedules, keynotes, and material assignments in Revit against the standard pack’s approved-products list and finish legends. Flags off-spec materials with the source clause or table reference from the brand standard, and proposes the conforming alternative where one exists. Useful for a global hospitality brand’s prototype room standards or a healthcare developer’s finish matrix, and pairs well with Revit template compliance work already in place.
-
Family-naming, type-naming, and signage-family compliance
Audits family names, type names, and signage families against the standard pack’s naming and classification rules. Identifies non-standard prefixes, missing client IDs, and stray legacy content that slipped in from older templates. Particularly valuable for client-owned FF&E and signage libraries, where the client expects exact codes on every tag; the Agent behaves like The Inspector here, checking every family instance before issue.
-
Standards-pack capture as a structured rule library
Each Labs deployment starts by capturing the customer’s standard pack — title blocks, view templates, finish keynotes, family library, signage standard, and any PDF brand guides — into a structured rule library. VitruAI works from existing Revit templates, sample projects, and written standards to codify rules that are currently enforced manually. The resulting rule pack is reusable documentation in its own right, independent of the Agent runs, and can inform future Revit template updates.
-
Available as a bespoke Labs engagement under MSA + Appendix
This Agent is available as a bespoke Labs engagement under MSA + Appendix. VitruAI co-builds the rule pack with the studio team over the first 2–3 weeks, calibrating against reference projects and existing Revit template compliance checks. From there, the Agent runs on each project tied to that pack, with per-issue reports that can sit alongside Code Compliance Agent outputs in the same delivery workflow.
Brand / Client-Standards Agent — FAQ
-
Whose standards does the Agent enforce — ours or our client’s?
The Agent enforces whichever standard pack you scope into the Labs engagement, including your own studio brand standards or a client’s mandated pack. Many studios run one rule library for internal work and a second for a hotel-brand prototype, healthcare developer, or retail rollout. Each pack is configured once, then applied to every Revit project tagged to that standard, alongside your existing Revit standards enforcement process.
-
How long does the standards-pack setup take?
A typical Labs engagement spends 2–3 weeks capturing an existing standard pack into the Agent’s rule library, calibrated per deployment. That work includes reviewing Revit templates, sample project models, and any PDF or slide-based brand guides to extract enforceable rules. The deliverable is a structured rule pack that doubles as clear documentation for future staff and template updates, not just a configuration file for the Agent.
-
Can it run on a brand pack we’ve inherited but don’t fully document?
Yes, the Labs scope explicitly covers inherited or partially documented brand packs. VitruAI runs a structured-extraction sprint over reference Revit projects, sheets, and schedules to infer the implicit rules that project teams already follow. The outcome is a written and machine-readable standard pack, so you gain both a documented standard and an enforcement Agent that can keep future projects aligned.
-
How does this differ from Studio QA/QC?
The Brand / Client-Standards Agent focuses on brand and client-specific rules, while the Studio QA/QC Agent targets generic Revit model quality such as warnings, worksets, and category usage. In practice, firms often run Studio QA/QC first to clean the model, then run the Brand / Client-Standards Agent to ensure title blocks, view templates, finishes, and families match the active pack. Both use the same VitruAI + Revit plumbing but apply different rule libraries.
-
Can it be deployed across multiple projects on the same standard pack?
Once a rule pack is built, it runs across as many Revit projects as you tag to that standard, with run-time calibrated per deployment. This is particularly useful for rolling client engagements, such as a hotel chain delivering 12 properties from the same prototype or a healthcare developer building a campus in phases. Each project produces its own per-sheet conformance report, making it clear where a specific site has deviated from the shared pack.
-
How does this relate to Revit template compliance work we already do?
The Agent sits on top of your existing templates and Revit template compliance checks rather than replacing them. It treats the template, client standard documents, and live models as sources of truth and reports where issued sheets or schedules drift away. Many teams use the findings to refine their templates and then rely on the Agent for ongoing enforcement as projects evolve.